大智慧指标改换成分析家指标的几个要点
大智慧指标改换成分析家指标的几个要点由于分析家股软比大智慧的功能强大,5.20版也是免费的,有许多朋友改用分析家了,如何将大智慧指标改为分析家呢?有这么几个要点需要掌握:
1.指标语句中的赋值名所使用的文字,字母,数字不能混用,如:
均线1:MA(C,5),COLORRED;
均线A:MA(C,5),COLORRED;
改成下面的就可以了:
均线一:MA(C,5),COLORRED;{把均线1中的数字1改成大写的一就可以了}
MA1:MA(C,5),COLORRED;{字母与数字可以混用}
2.中间语句后面不能有颜色代码,如:
MA1:=MA(C,5),COLORRED;{中间语句的格式是在语句名与语句之间的冒号后面加个=号,这样的语句分析家指标编辑器不承认},把这个语句改成下面格式的即可:
MA1:=MA(C,5);{取消语句中的COLORRED颜色代码}
3.绘图函数显示符号的位置
大智慧的绘图函数能将要显示的文字或符号的位置能自动中间对齐,分析家则需要用函数来修正.如:
DRAWICON(C/REF(C,1)>1.08,LOW,1);{大智慧能自动在当日K线下显示红脸}
DRAWICON(C/REF(C,1)>1.08,LOW,1),ALIGN0;{分析家需要ALIGN0这个函数来中对齐,显示当日K线下的红脸}
DRAWTEXT(C/REF(C,1)>1.08,LOW'大阳线'),COLORYELLOW;{大智慧能自动在当日K线下显示大阳线}
DRAWTEXT(C/REF(C,1)>1.08,LOW'大阳线'),COLORYELLOW,ALIGN0;{分析家需要ALIGN0这个函数来中对齐,显示当日K线下的大阳线}
下面是大智慧指标改成的分析家指标:
{全能MACD}
DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
STICKLINE(MACD>=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORRED;
STICKLINE(MACD>=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORGREEN;
STICKLINE(MACD<=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORMAGENTA;
STICKLINE(MACD<=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORCYAN;
STICKLINE(C,0.2,0.2,3,0),COLORWHITE;
STICKLINE(C,-0.2,-0.2,3,0),COLORWHITE;
STICKLINE(C,0.1,0.1,3,0),COLORYELLOW;
STICKLINE(C,-0.1,-0.1,3,0),COLORYELLOW;
DRAWICON(CROSS(DIFF,DEA),DEA,10);
DRAWICON(CROSS(DEA,DIFF),DEA,11);
多转空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));
空转多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3)));
DRAWICON(多转空,MACD,5),ALIGN0;
DRAWICON(空转多,MACD,4),ALIGN0;
低位金叉:IF(CROSS(DIFF,DEA) AND DIFF<-0.1,0.3,0),COLORYELLOW,POINTDOT;
STICKLINE(低位金叉,0,0.3,8,0),COLORYELLOW;
DRAWICON(低位金叉,0.3,10),ALIGN0;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:IF(CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1,0.2,0),COLORMAGENTA,POINTDOT;
STICKLINE(二次金叉,0,0.2,8,0),COLORMAGENTA;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:IF(REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA),0.1,0),COLORRED,POINTDOT;
STICKLINE(底背离,0,0.1,8,0),COLORRED;
DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN;
A3:=CROSS(DIFF,DEA) AND DEA<0;
零下二次金叉:IF(FILTER(COUNT(A3,21)=2,10),0.05,0),COLORWHITE,POINTDOT;
STICKLINE(零下二次金叉,0,0.06,8,0),COLORWHITE;
